RAFAMET S.A.

RAFAMET S.A.

Products Center

CNC gantry milling machining center
FBM eries
GMC eries
HSM eries

HSM 180 CNC Gantry Milling Machine

HSM 180 CNC HSM 180 CNC Gantry Milling Machine is primarily used for all types of milling, drilling and hinging machining. The machine is equipped with a biaxial moving tool head and a tool library to ensure the machining of complex parts. The table moves along the bed guide rail and is also equipped with a T-groove to make the workpiece easier to clamp and firm.

The two columns at the bottom of the machine tool are connected with the foundation, and the top is connected with the fixed transverse guide rail. The installation form constitutes the gantry type milling machine.

Untitled Document

[1]

[2]

[3]

	TECHNICAL SPECIFACTIONS

Type			HSM 180 CNC
Size of table		mm	1000÷1676 ⁽¹⁾
Maximum travel of table(x axis)		mm	1250
Range of load of table	1st range	x10 kN	≤3
Range of load of table	2nd range	x10 kN	≥3
Maximum load of workpiece		x10 kN	12
Rapid travel rates of table	1st range	m/min	40
Rapid travel rates of table	2nd range	m/min	25
Maximum travel of table slide		mm	1500
Maximum travel of vertical saddle		mm	3000
Rapid travel rates of vertical saddle and slide	1st range	mm/min	40
Rapid travel rates of vertical saddle and slide	2nd range	mm/min	25
Feeding range of vertical saddle and slide		-	≤5000
Maximum distance between main shaft surface and table surface		mm	1200*
High speed octagon cross section of ram		mm	650
Maximum rated power of main drive motor i=1	S1	kW	64
Maximum rated power of main drive motor i=1	S6	kW	70
Maximum rated power of main drive motor i=5	S1	kW	55
Maximum rated power of main drive motor i=5	S6	kW	66
Maximum rated power of main drive motor i=1	Rate i=1	rpm	3000
Maximum rated power of main drive motor i=1	Rate i=5	rpm	750
Maximum rated power of main drive motor i=1	Rate i=1	rpm	820
Maximum rated power of main drive motor i=1	Rate i=5	rpm	3500/4200
Machine tool overall dimensions：
Length		mm	14000
Width		mm	7700
Height		mm	6750
Approximate weight of machine tool		×10kN	ca.60
*As for no-additional equipment, using double-axis tool, specifications:：
The distance of slide surface and table surface	Min.	mm	960
The distance of slide surface and table surface	Max.	mm	2260
The distance of main shaft and table surface	Min.	mm	200
The distance of main shaft and table surface	Max.	mm	1000
© RAFAMET S.A. - 2013 版权